OSSC Remote not working after firmware update

[milkybar1983]

Just got a new OSSC from ebay and first thing I did was update the firmware, all went OK but the remote won’t work after reboot. The unit still works and the hardware buttons still work. Also the LED flashes when you press buttons on the remote so its receiving a signal. None of the buttons actually do anything though ie. menu
According to the ebay seller the remote has to be ‘re-learned’ any ideas?

 

[Awbacon]

Sounds like you need to reprogram the remote, just like any TV. I have no idea how that's done but I'd just contact the OSSC people. Shouldn't be too hard

 

[Awbacon]

To configure the OSSC for a new infrared remote, find a suitable manufacturer code (e.g. from Toshiba, NEC etc.) so that the OSSC's green LED blinks when a remote button is pressed. Now, power cycle the OSSC while holding BTN1 on the OSSC's PCB. A target function name (e.g. "MENU") will then be displayed on the OSCC's LCD screen. Press the corresponding key on the remote control, if the OSSC receives the code correctly you will be prompted to confirm the new code. Press the same key again to confirm, or BTN0 on the OSSC's PCB to go to the previous key. If you press BTN0 when configuring the first key, the default keymaps will be loaded.

 

[Awbacon]

from JunkerHQ

 

[Cerv3ro]

How can i update the firmware ? what does it fix/add?

 

[milkybar1983]

thanks so much @Awbacon !!!

 

[Awbacon]

thanks so much @Awbacon !!!

NP

 

[Maverick]

How can i update the firmware ? what does it fix/add?

OSSC Firmware v0.83 Released

Markus has just posted the latest firmware for the Open Source Scan Converter and added a long list of features: Scanline updates and fixes - Overlay pattern customization feature - Fixed non-alternating mode with line4x interlace sources - Added half-interval option for pre-linedoubled sources

www.retrorgb.com