- Joined
- Jul 1, 2019
- Messages
- 10
- Reaction score
- 0
- Points
- 1
- Thread Author
- #1
Hello. Does anyone have the installation guide for Genesis 2 VA4 3BP v2? I found the installation pics from retrorgb and some other sources but I am still wondering about the csync connection. Does the output S on the 3BP v2 boards need to be connected to the multiout pin with the traces cut? The pic shows the S connection soldered to a trace above R9. is the trace exposed and the wire from S soldered there? Does the trace for csync at the multiout connector still needs to be cut? appreciate any help. thanks.
